Toshiba HWT-602S21SM3W-E(TR) Service Manual page 184

11. Night time Low-noise Setting
• This function is available only for the header remote controller.
• This setting is used to reduce noise output, from the outdoor unit, during night time for neighbors. Night time
lownoise operates with lower operation frequency and fan tap than normal operation only for the set time period.
1
Press the [ ] / [
MENU screen, then press the [
2
Press the [ ] button to select "ON" on the Silent mode screen,
then press the [
3
Start the heating, cooling or hot water operation. The
the set-up time zone.
<How to enable, set start time and end time of night time low-noise>
• This function is available only for the header remote controller.
1
Press the [ ] / [
MENU screen.
2
Press the [ ] button for 4 seconds or longer to enter the setting mode. The DN code setting
screen appears.
DN_0A: Start time (Range: 0-23, Default: 22)
0B: End time (Range: 0-23, Default: 06)
3
Press the [ ] / [
value.
The same value cannot be set to 0A and 0B.
4
Press the [ ] button. The set time is registered.
] button to select "Silent mode" on the
] button.
] button.
] button to select "Silent mode" on the
] button to select DN or Data, then press the [
mark appears on the top screen during
183
MENU(1/2)
Auto mode
Schedule timer
Night setback
Silent mode
Hot water boost
SET
Silent mode
ON
OFF
FIX
MENU(1/2)
Auto mode
Schedule timer
Night setback
Silent mode
Hot water boost
SET
] / [ ] button to set the
Silent mode
Code
(DN) Data
FIX