Table of Contents
Advertisement
Connecting Flash Link optical cable to SeaLife cameras
For SeaLife DC1400 UW camera:
Attach the other end of the optical cable to the camera adapter
included with your SeaLife camera.
1.
1. Push the optical cable into one of the grooves so it's locked firmly
into position. The end of the cable must be directed at the camera's
flash but should not stick out beyond the adapter. The adapter has
two grooves, so you can add another cable when using two flashes.
2. Attach the Flash Link adapter around the lens and push down until
it locks firmly into place. There are two small locking mechanisms
located on the outer edge of the adapter that should lock in to the
camera housing. Make sure the adapter is oriented so it is aligned
with the recessed flash window.
3. Once the cable and adapter is firmly attached, run the cables along
the bottom of the flash base and up the flash arm. The cables
should be secured to the flash arm using the Velcro ties provided
with your flash accessory.
2.
3.
9
Advertisement
Table of Contents
