Table of Contents
Advertisement
3. Flash fires sometimes but not all the time.
a. This is normally caused by a damaged Flash Link optical cable
or if the optical cable is not set-up correctly. Inspect the optical
cable for damage and make sure the cable is attached and
secured.
b. Check that your camera settings are correct.
4. The recycle time is very long.
a. This is normally the result of low battery power. The flash
recycle time should not be more than 7 to 8 seconds when the
flash is set to full power.
b. Replace or recharge batteries if the recycle time is longer than
10 seconds.
c. Remove diffuser for shooting distances beyond 2ft (60cm).
35
Advertisement
Table of Contents
