Sealife Sea Dragon SL963 Instruction Manual page 13

Connecting Flash Link optical cable to NON-Sealife cameras
The universal cable adapter included with the flash allows you to
attach the optical cable to any underwater camera housing.
If your housing has a 7mm optical cable plug port, please use the
included SL96307 Flash Optical Cable Plug Adpater and skip the next
steps.
Step 1: Cut two small strips of adhesive
backed hook-and-loop fastener
Step 2: Remove adhesive backing strips
and firmly attach above and below the flash
window of the underwater housing. Make
sure housing surface is clean and dry.
Step 3: Unscrew cable adapter assembly
and insert the larger half through the hole
of the hook-n-loop fastener as shown. Make
sure the "hook" side of the fastener is facing
towards the wide end of the adapter (towards
the camera).
Sea Dragon Flash Optical
Cable Plug
(SL96307)
13