Table of Contents
Advertisement
IV. Preparing your flash
Important:
Make sure o-rings are perfectly clean, undamaged and lightly lubed. See page
26 for important information on maintaining a waterproof seal.
6
INSTALLING BATTERIES:
1) Unscrew waterproof battery cap.
2) Insert 4 new or freshly charged AA
batteries according to the polarity
markings. For best performance, use
4 AA 2000mAh or higher Ni-MH
rechargeable batteries.
3) Align cap notch with key and screw on
waterproof battery cap. Lightly hand-
tighten - Do not overtighten using
excessive force or tools.
Align cap notch
with key
Advertisement
Table of Contents
