Table of Contents
Advertisement
Connecting Flash Link optical cable to NON-SeaLife cameras
(continued)
14
Step 4: Loosely screw on the smaller half of
the adapter.
Step 5: Insert the cable(s) so about 1mm
sticks out of the other end and tighten the
cable adapter assembly. Hand tighten – do
not use tools.
Step 6: Attach fastener with cable to
underwater housing so the cable is centered
over the flash window.
Step 7: User scissor to cut away excess
fastener material. Important: Leave enough
fastener material so it completely covers
the flash window or else the stray light
escaping from the flash window may cause
backscatter.
Advertisement
Table of Contents
