Synchronizing Your Flash To Non-Sealife Cameras - Sealife Sea Dragon SL963 Instruction Manual

VI. Synchronize flash to non-SeaLife cameras
The flash is factory set to work with your SeaLife camera. Follow these
instructions to sync the flash to other underwater camera brands:
1. Turn OFF flash power.
2. Push and HOLD test button,
and power ON flash.
3. The flash-ready light will be
blinking.
4. With your camera connected to the optical cable and flash, take
a test picture. Important: Make sure your camera's flash is set to
FORCE ON so it always fires.
5. The flash-ready light will stop blinking. The flash is now
synchronized to your camera.
17