Table of Contents
Advertisement
Connecting Flash Link optical cable to the external flash
The Flash includes the Flash Link optical cable (item #SL96208). The
optical cable is used to transmit light from the camera to the light
sensor under the flash head. The external flash will fire when the
light sensor detects light coming from the end of the cable.
The external flash should come with the optical cable already attached
to the flash head, but it is good to know how the cable can be removed
and re-attached.
1.
1. Turn the cable locking screw counter-clockwise by about 2
rotations to loosen the clamping effect of the lock. Do not remove
the locking screws.
2. Insert the optical cable into the hole of the cable lock until the cable
stops [make sure cable is pushed up all the way].
3. Turn the cable locking screw clockwise to lock the cable into place
[finger tight only – Do not over tighten].
8
2.
3.
Advertisement
Table of Contents
