FTK01 & FMC2105-SU
FTTR Fiber Termination Kit & Field Mountable Connector
Quick Installation Guide
Step 4 Keep the cable close to the stop dog and screw the boot. Ensure that the distance between the
end face of the tightened boot and the lower end face of the main body is less than 1 mm.
Step 5 Install the SC housing to the main body, as shown in the following figure.
----End
Issue 02 (2023-05-22)
Copyright © Huawei Technologies Co., Ltd.
5 Installing the Optical Fiber Connector
17