Huawei FTK01 Quick Installation Manual page 21

FTK01 & FMC2105-SU
FTTR Fiber Termination Kit & Field Mountable Connector
Quick Installation Guide
Push an optical cable into the main body of the connector with the 2 mm side parallel to the
slot until it reaches the end, push the lock to OFF to clamp the optical cable, keep a certain
pressure, and tighten the boot.




Step 3 Push the lock up to OFF to clamp the fiber.
Issue 02 (2023-05-22)
1.2 mm x 1.6 mm transparent optical cable (with a matching piece and vertically
pushed in)
2 mm x 1.6 mm transparent optical cable (horizontally pushed in, the 2 mm side is
clamped)
2 mm x 1.6 mm terminal flexible optical cable (horizontally pushed in, the 2 mm
side is clamped)
2 mm x 3 mm terminal flexible optical cable (vertically pushed in, the 2 mm side is
clamped)
Copyright © Huawei Technologies Co., Ltd.
5 Installing the Optical Fiber Connector
16