Cleaning Agents - Omegasonics - Omegasonics Viking PDX3 Operation & Instruction Manual

CLEANING AGENTS - OMEGASONICS

Omegasonics carries a full line of cleaning agents. Each cleaning agent has a unique
cleaning specialty and use. Some of the products are as follows.
 OmegaSupreme – Heavy-duty degreaser removes carbon, oil, dirt, grease and dirt
from a variety of metals. It is excellent for cleaning and brightening ferrous and
nonferrous metals. Product may cause aluminum to scar if left in contact with
aluminum part for an extended period of time. Product contains a short-term flash
rust inhibitor.
 OmegaClean – General to heavy-duty degreaser which will remove carbon, oil,
grease and dirt from a variety of metals and will not harm aluminum finishes.
Especially formulated for the aerospace industry as well as for automotive
applications. Has built in conditioners for hard water (high calcium and magnesium
content) sources and good quality rust inhibitors.
 OmegaZyme – Ideal for industrial applications cleaning oil and grease from
aluminum, stainless steel and titanium parts. Does not remove carbon. Will cause
cast iron and cold rolled steel parts to rust if not used in conjunction with silicate,
nitrate or trisodium phosphate rust inhibitors or with another cleaning agent
containing rust inhibitors.
 OmegaCitriSurf 2250– Designed for industrial and aerospace applications where
stainless steel passivation (the removing of free iron from the surface) is required.
Also useful in removing calcium deposits from a variety of metals including brass
and steel.
 Omega DeScaler - A unique product formulated to remove rust, corrosion, heat
scale and mineral deposits from a variety of metals. Excellent when used in an
ultrasonic tank to remove rust from metal components exposed to extreme moisture
and water. Effectively used to remove mineral deposits from heat exchangers
 Omega Mold Release - A high pH concentrated cleaning agent used successfully to
remove burnt-on crystalline rubber, plastic and food from molds, dies and other
metal surfaces
 OmegaBlue - Designed to remove ink and ink residue from metal and rubber
components including Anilox rollers.
 Omega Aqua Clean LPH – A reduced pH solution designed to clean electronic and
electrical components. Also effective at removing solder flux residue. It is safe on all
surfaces that can be cleaned in water and any surfaces that may be damaged in a
high pH solution.
The above products are concentrates. These products are formulated to be used at a
10 to 1 ratio. Ten 10 parts water one part cleaning detergent
32