Omegasonics Viking PDX3 Operation & Instruction Manual page 14

Operation
 The temperature controller is factory set at 140˚F for Tank 1 and 150˚F for Tank 2.
 To change the Set Value, lightly press the up arrow key to increase or lightly press
the down arrow key to decrease the value. Pressing and holding down either arrow
key will change the displayed value rapidly.
 Upon changing the Set Value, this lower display will flicker indicating the new value
is not set. To make this value permanent, press the RETURN Key
 Experience shows that the optimum ultrasonic cleaning temperature for most
applications is 120˚F - 160˚F.
 When ready to activate the heat, turn the selector switch marked TEMPERATURE
to the ON position.
 The heat circuit and the ultrasound can be operated simultaneously.
If increased or decreased security is desired, please contact technical support at
Omegasonics to receive instructions.
.
14