Cooper WaveLinx Lite User And Programming Manual page 93

User Manual: WaveLinx Lite (4.0)
Select the site
7. Tap on 'Zones', and then in the 'Assigned Zones' section, tap the '
button. Wait a few minutes to give devices time to process the change before moving on to the next step.
8. In the occupancy set list, select the occupancy set that the zone will be assigned to and open it for modification.
9: Tap on 'Zones', and then in the 'Available Zones' section, tap the '
three times to exit fully out of the occupancy set.
Tap 'Zones'
Tap ' ' icon
If errors or alert icons ' ' display after this step, refer to the section "Resolve Mobile Application Communication Issues" on page 164 to resolve the errors before
73
proceeding.
Select the area
Zone moves to
'Available Zones'
Not connected
Connected
Verify network
connection
Tap 'Occupancy'
' in the row of the zone to unassign. Once complete, tap on the back
' in the row of the zone to assign. Once complete, tap on the back button
Tap ' ' icon
Select the occupancy
set to modify
73
Zone moves to
'Assigned Zones'
www.cooperlighting.com
93