B73 - Setting Sos Dial Interval; B74 - Setting Auto Answer; B75 - Setting Favorite Contact - FIFOTRACK Q3 Command List

FIFOTRACK Q3 COMMAND LIST
B73 – Setting SOS Dial Interval
Source GPRS/COM/SMS
Description B73,<sos-interval>
01 For some phones, voicemail answers incoming call when no person picks it up. It may
cause device NO dialing the next SOS number. B73 command can be used to avoid
this situation.
02 sos-interval: Interval of dialing SOS number, unit second, default 0. When the interval
time arrived, device hangs up the current number, and dials the next one.
03 Setting proper sos-interval according to actual situation.
Reply B73,<err_code>
01 err_code: procession error code.
Example
Retrieve C04,B73
B74 – Setting Auto Answer
Source GPRS/COM/SMS
Description B74,<auto-answer>
01 Default, pressing CAL button to answer the incoming phone-call; B74 command is
used to enable auto answer
02 auto-answer: 0 (default)~Disable auto answer, it is needed to press CAL button to
answer the incoming phone-call; 1~Enable auto answer, tracker answers the
incoming call after ringing once
Reply B74,<err_code>
01 err_code: procession error code.
Example
Retrieve C04,B74
B75 – Setting Favorite Contact
Source GPRS/COM/SMS
Description B75,<contact-no>
01 contact-no: Favorite contact phone number
02 After contact-no set, long press CAL button to start dialing
Reply B75,<err_code>
OK – Succeed.
UNSUPPORT – Command not supported.
FAILED – Procession failed.
OK – Succeed.
UNSUPPORT – Command not supported.
FAILED – Procession failed.
20