B70 - Setting The Functions To Button; B71 - Setting Gps/Wifi Order - FIFOTRACK Q3 Command List

FIFOTRACK Q3 COMMAND LIST
After cancelled, voice displaying will be stopped, and NO GPRS/SMS alarm package sent;
When rst-on-motion==1, NO pre-alarm voice display, nor fall down alarm triggered under
continuous moving or walking status
05 accl-level: Acceleration level for fall down detection, default 55, range [20,60]
06 "Fall Down" alarm code 31. Refer to Appendix-A for more detail
Reply B36,<err_code>
01 err_code: procession error code.
Example B36,1,30,20,1
01 Enable fall down detection, after fall down detected, tracker starts voice displaying to
remind user. It will send out GPRS/SMS alarm package after 20s, but will continue voice
displaying till 30s time is up.
During the pre-alarm period, shaking/walking/pressing SOS button will cancel pre-alarm
and alarm trigger delay
Retrieve C04,B36
B70 – Setting the Functions to Button
Source GPRS/COM/SMS
Description B70,<hangup>,<pwroff-disable>,<long-key-voice>
01 hangup: 1~Press SOS button to hang up phone-call conversation; 0 (default)~Disable
hang-up function of SOS button
02 pwroff-disable: 1~PWR button cannot be used to shut down device; 0 (default)~Long
press PWR button can shut down device
03 long-key-voice: 1 (default)~Display voice when long press SOS or CAL button; 0~No
voice displaying for long press SOS and CAL button
Reply B70,<err_code>
01 err_code: procession error code.
Example
Retrieve C04,B70
B71 – Setting GPS/WIFI Order
Source GPRS/COM/SMS
Description B71,<mode>
01 Device supports two methods for positioning, GPS and WIFI, and B71 command is
used to set the order of use
OK – Succeed.
UNSUPPORT – Command not supported.
FAILED – Procession failed.
OK – Succeed.
UNSUPPORT – Command not supported.
FAILED – Procession failed.
18