Related Manuals for FIFOTRACK S50K
Summary of Contents for FIFOTRACK S50K
- Page 1 FIFOTRACK VEHICLE GPS TRACKER 4G+2G THAILAND DLT VERSION Model: S50K Version: V1.2 www.fifotrack.com...
- Page 2 S50 USER GUIDE Copyright and Disclaimer All copyrights belong to Shenzhen fifotrack Solution Co., Ltd. You are not allowed to revise, copy or spread this file in any form without consent of fifotrack. is trademark of fifotrack, protected by law.
- Page 3 Author Revision Date Details V1.1 Cici Wu May 15, 2019 Initial revision V1.2 Cici Wu Oct 21, 2022 Modify the GPS & GSM module information; Modify the frequency bands. Copyright © fifotrack 2015 All rights reserved First in first out...
- Page 4 Parameter configuration tool on PC V1.11.0 < PL2303_Prolific_DriverInstaller > Driver for USB cable V1.0 < Firmware Upgrade Suite> Tool for firmware upgrade Video Guide Link http://www.fifotrack.com/Support/video.html Marketing Materials Download Link http://www.fifotrack.com/Support/marketing.html Copyright © fifotrack 2015 All rights reserved First in first out...
-
Page 5: Table Of Contents
9.1 I/O Installation ....................... 15 9.2 Power/Ground Cable ..................... 16 9.3 Positive/Negative Digital Input (IN1/IN2) ..............16 9.4 Analog Input( AD1) ......................17 9.5 Output control (OUT1) ....................17 Copyright © fifotrack 2015 All rights reserved First in first out... -
Page 6: Product Overview
The core feature of S50K includes internal GPS/GSM antennas, IP66 waterproof, 1 digital input, 1 analog input, 1 output and 1 RS232 port for DLT magnetic reader. S50K uses own FIFOTRACK GPRS PROTOCOL (same as A500) which is simple and practical. The users can integrate protocol into their own platform efficiently. -
Page 7: Other Functions
Stop Car Remotely (optional, with relay) ⚫ 1 RS232 Port for magnetic reader 3 Product and Accessories 3.1 Standard Packing Box Main Unit 3.2 Optional Accessories AS10 Fuel sensor Magnetic reader USB Cable Relay Copyright © fifotrack 2015 All rights reserved First in first out... -
Page 8: Product Appearance
S50 USER GUIDE 4 Product Appearance Front View Overview Rear View Side View Copyright © fifotrack 2015 All rights reserved First in first out... -
Page 9: Pcb Overview
Device is initialing Flash 2s on and 2s off No GSM External Power Light (Red) External power cut Flash every 0.1s External power low Solid On External power normal Copyright © fifotrack 2015 All rights reserved First in first out... -
Page 10: Specification
1 Analog input, voltage range is 0-36V. The analog input can be converted to digital input1 by command B18. 1 Output 1 RS232 for magnetic reader 1 USB port (inside case) Copyright © fifotrack 2015 All rights reserved First in first out... -
Page 11: First Use
S50 USER GUIDE 8 First Use 8.1 Installing the SIM Card ⚫ S50K is 4G+2G tracker. Make sure the SIM card is compatible with 4G. ⚫ SIM card is Micro type, 15*12mm. ⚫ Ensure the SIM card has enough balance. -
Page 12: Gps Antenna
Don’t install the Device where is shielded by metal. For example, inside a metal can. 8.3 Tracking by Calling Call the SIM card number inside S50K, you will get a SMS reply with Google map link. Click it for specific map location. -
Page 13: Sms Reply Content Example
S50 USER GUIDE 8.4 SMS Reply Content Example 2019-05-29 09:41:01, 0km/h, Disconnect, A, EXPW: OFF, http://maps.google.com/maps?q=22.643105,114.018258&t=m Copyright © fifotrack 2015 All rights reserved First in first out... -
Page 14: Tracking By Sms Command - C01
SMS Reply: Current location Note：Default SMS password is “000000”, set new SMS password with B10 command. Please refer to <fifotrack S50K GPRS Protocol and Command List > for more details. Copyright © fifotrack 2015 All rights reserved First in first out... -
Page 15: Configuration On Pc
USB cable driver and install it before using parameter tool. Refer to <USB Cable Driver Installation Guide> if need. Connect S50K to PC with USB cable. Run “Parameter Tool for DLT Solution” software which will identify port automatically and read all of the current parameters. -
Page 16: Device Installation
Digital input2, positive input, default connect to ACC for status detection. Blue 12 bits analog input, voltage range 0-36V, adjustable, default 0-5V range. Connect to external sensor. For example, fuel sensor. AD1 can be converted to input1 Copyright © fifotrack 2015 All rights reserved First in first out... -
Page 17: Power/Ground Cable
Max open-drain (inactive) voltage: 45V Max current for output low voltage (valid): 500mA RS232 Port Orange DC5V Black Ground Green Sensor_RS232_TX Purple Sensor_RS232_RX 9.2 Power/Ground Cable 9.3 Positive/Negative Digital Input (IN1/IN2) Copyright © fifotrack 2015 All rights reserved First in first out... -
Page 18: Analog Input( Ad1)
2. Raw data is in Hex, need convert to decimal, range is 0~4096. 0 means empty, 4096 means full. 9.5 Output control (OUT1) Please e-mail us at info@fifotrack.com if any question or feedback. Copyright © fifotrack 2015 All rights reserved...