B72 - Setting Reminder Mode For Incoming Phone-Call - FIFOTRACK Q3 Command List

FIFOTRACK Q3 COMMAND LIST
02 mode: positioning mode, default mode==0, description as below
mode==0: Mandatory use GPS for all time, device uses GPS to get positioning
information, and uploads to server whether GPS fixed or not.
mode==1: Device uses GPS first, and switch to WIFI for positioning when GPS failed
mode==2: Device uses WIFI first, and switch to GPS for positioning when no WIFI AP
got
mode==3: Device always uses the last GPS information for uploading
03 Device uploads unfixed GPS package to server when neither GPS nor WIFI positioning
succeed
Reply B71,<err_code>
01 err_code: procession error code.
Example
Retrieve C04,B71
B72 – Setting Reminder Mode for Incoming Phone-call
Source GPRS/COM/SMS
Description B72,<incall-note>,<num-sel>
01 When phone-call incoming, device can remind user by voice ringing or vibration
02 incall-note: Reminder mode
incall-note==0: No reminder for incoming phone-call
incall-note==1: ringing
incall-note==2: vibration
incall-note==3 (default): Both ringing and vibration
03 num-sel: Set incoming phone number type
num-sel==0: Only SOS and Favorite contact
num-sel==1: All number
04 Conversation mode
SOS number (Set with B11)
Favorite contact(Set with B75)
Other numbers
Reply B72,<err_code>
01 err_code: procession error code.
Example
Retrieve C04,B72
OK – Succeed.
UNSUPPORT – Command not supported.
FAILED – Procession failed.
OK – Succeed.
UNSUPPORT – Command not supported.
FAILED – Procession failed.
Monitor or two-way, set with B31
Two-way
Two-way
19