S30 USER GUIDE Copyright and Disclaimer All copyrights belong to Shenzhen fifotrack Solution Co., Ltd. You are not allowed to revise, copy or spread this file in any form without consent of fifotrack. is trademark of fifotrack, protected by law.
Page 4
How to install USB cable driver V1.1 <Firmware Upgrade Guide> How to upgrade firmware V1.1 <fifotrack Fuel Sensor AS10 User Manual > How to use AS10 fuel sensor V1.1 <fifotrack Vehicle Original Fuel Sensor how to use original fuel sensor Solution User Guide>...
Power input range is 8-92V with industrial design. Internal GPS/GSM antennas, IP66 waterproof, 2 digital input, 1 analog input and 1 output. S30 uses Own FIFOTRACK A01 GPRS PROTOCOL which is simple and practical, this enables the customers to integrate protocol into their own platform efficiently.
USB cable driver and install it before using parameter tool. Refer to <USB CABLE DRIVER INSTALLATION GUIDE> if need. Connect S30 to PC with USB cable. Run “fifotrack Parameter Tool” software which will identify port automatically and read all of the current parameters.