Maintaining The Hopper; Aligning The Hopper To The Chute Seal - Toro 31051 Operator's Manual

Maintaining the Hopper

Aligning the Hopper to the
Chute Seal
1. Loosen the 4 bolts that secure the hopper lift
supports to the pivot fittings
Figure 136
1. Bolts
2. Slide the hopper forward or rearward until the
hopper inlet aligns with the chute seal
137).
(Figure 136).
g232010
g232011
(Figure
84
Figure 137
1. Chute seal
3. Tighten the 4 bolts
2. Hopper inlet
(Figure 136).
g232009