Toro 31051 Operator's Manual page 40

Maintenance Service
Interval
Every 200 hours
Every 250 hours
Every 300 hours
Every 400 hours
Every 500 hours
Every 1,000 hours
Every 1,500 hours
Every 1,500 hours or
2 years, whichever
comes first
Maintenance Procedure
• Lubricate the driveshaft U-joints.
• Torque the wheel lug nuts.
• Check the rear wheel alignment.
• Inspect the cooling-system hoses.
• Check the condition of the alternator belt.
• Check the tension of the alternator belt.
• Check the condition of and tension of the PTO belt.
• Adjust the PTO clutch gap.
• Change the hydraulic-fluid filter.
• Change the engine oil and engine-oil filter.
• Change the oil in the mower-deck gearbox.
• Empty and clean the fuel tank.
• Inspect the fuel lines and connections.
• Replace the filter of the fuel/water separator.
• Replace the fuel-filter element toward the front, right side.
• Replace the hydraulic fluid.
• Flush and replace the cooling-system fluid.
• Replace any moving hoses.
40