Table of Contents
Advertisement
Figure 75
Installing the Battery
Install the battery as shown in
Figure 76
g216923
Figure
76.
g216922
Charging the Battery
WARNING
Charging the battery produces gasses that
can explode.
Never smoke near the battery and keep sparks
and flames away from the battery.
Important:
Always keep the battery fully charged
(1.265 specific gravity). This is especially
important to prevent battery damage when the
temperature is below 0°C (32°F).
1.
Charge battery for 10 to 15 minutes at 25 to 30
A or 30 minutes at 10 A.
2.
When the battery is fully charged, unplug
the charger from the electrical outlet, then
disconnect the charger leads from the battery
posts
(Figure
3.
Install the battery in the machine and connect
the battery cables; refer to
(page
58).
Note:
Do not run the machine with the battery
disconnected, electrical damage may occur.
1. Positive battery post
2. Negative battery post
58
77).
Installing the Battery
Figure 77
3. Red (+) charger lead
4. Black (-) charger lead
g000960
Advertisement
Table of Contents
