Radio Operation - Hyundai PR 570 PLLUB Instruction Manual

RADIO OPERATION

TUNING RADIO STATIONS
1. Press the SOUR button on unit to select FM, this unit is designed for FM ONLY.
2. Tune to desired station by pressing the /TUN.- BUTTON and /TUN.+ BUTTON on unit,
the display will show the band frequency. Example: FM 97.10 MHz.
3. Extend FM TELESCOPIC ANTENNA to its full length and gently move the unit back and
forth to get the best reception, or place the unit in an open location.
4. To turn off the radio, press the SOURCE button to switch to USB functions or slid the
POWER SWITCH to "OFF" to turn off the unit
AUTOMATIC TUNING STOP
Press and hold the /TUN.- BUTTON or /TUN.+ BUTTON to start tuning, Tuning stop
automatically when a station is received.
RADIO AUTO SCAN (SEARCH)
Press and hold the SCAN button, the unit will conduct auto scan and program until having found
a strong signal. The unit will start to broadcast the P01 after searching finished.
Press the M.+ button on unit to choose next programmed station.
RADIO STATION MEMORY OPERATION
You may pre-store 40 (FM) radio stations in memory for your preference, so as you can listen to
your desired station directly and quickly, no need to tuning and search for again.
1. Press the /TUN- or /TUN+ button to select the first desired station.
2. Press MEM. button on unit, "P01" will flash on the display. Press the M.+ button to choose
the desired sequence you want to store, then press the MEM. button again to enter.
3. Search another station, repeat steps (1) & (2) until all desired stations stored. Up to 40
stations can be programmed.
4. Press the M.+ button to listen to the stored station directly
LISTENING TO USB & USB OPERATION
1. Press the SOURCE button to select "USB" mode.
2. Connect the USB to the USB INPUT. The playback stars from track 1 automatically after
reading the USB.
3. To pause playback, pressbutton. The current playing time and "PLAY" will flash on the
display.
To resume playback, pressbutton again.
4. To select a desired track, press the /TUN.+ or /TUN.- button respectively during playing
until the desired track appears on the display. The unit will start play automatically.
5. To search for a particular passage during playback, press and hold the /TUN.+ or /TUN.-
button to scan the current playing track at high speed until desired point (passage) appears,
then release the button for normal playback mode.
6. To select a song which track number exceeds 10, press and hold the /TUN.+/+10 or
/TUN.-/-10 button each time to skip forward/backward 10 tracks in the stop mode, then
press the /TUN.+ or /TUN.- button to select desired track.
7. Press and hold the STOP
USB and STOP.
8. It supports 32GB (USB)
CAUTION:
► Do not use any USB extension cable for connecting the USB bar which may cause harmful
interference
button to stop playing. The display will show total number of
ENG - 23
ENG