Program Mode; Recording From Radio - Hyundai H-1440 Instruction Manual

• Press PROG/REPEAT button again
for all tracks repeat playing.
• To cancel repeat play, press PROG/
REPEAT button once again.

Program mode

• Up to 20 CD tracks or 99 MP3 tracks
can be programmed for disc play in any
order, including one and the same track.
Before use, be sure to press STOP button.
• Press PROG/REPEAT button, the
memory position number will show on the
display.
• Select a desired track by using BACK
and NEXT buttons.
• Press PROG/REPEAT to confirm.
• Repeat the two last steps as
described above to enter additional
memories into the program if necessary.
• When all the desired tracks have
been programmed, press PLAY/PAUSE/
USB button to play the disc in the order
you have programmed.
• To stop the CD, press STOP button.
The program memory will be cleared
only when the CD compartment is opened
or turn off the CD or power supply.
• To turn off the CD player set
FUNCTION switch to TAPE (OFF) position.
Good quality sound is guaranteed
only when playing licensed discs.
Cassette playback
• Slide FUNCTION switch to TAPE
(OFF) position.
• Press button to open the
cassette compartment.
• Insert a cassette and push the
cassette door to close the cassette
Instruction manual
compartment. The full tape reel should be
on the right side.
• Press button to start playback.
• Press button to pause playback.
If you press it again the playback will
continue.
• Press button to stop playback,
press the button again to open the cassette
door so you can take out the tape.
• When the tape plays to the end,
playback will stop automatically.
• Fast forward and rewind: You
can run forward and rewind the tape.
Stop playback. Use
forward and button for fast backward
playback. When you have reached the
desired tape point, press
stop the process.
Never use fast forward or rewind
operations during playback. This may
cause damage to the tape.
Cassette recording
Insert a blank cassette with the tape-
side up. Close the cassette compartment.
The unit is now ready to start recording,
which can be done from either the radio
or CD.

Recording from radio

• Set FUNCTION switch to RADIO
position.
• Select a band and tune to the desired
station by rotating TUNING regulator.
• Press button and
simultaneously to start recording.
Recording from CD
• Set FUNCTION switch to CD/MP3/
button for fast
button to
button
5