Table of Contents
Advertisement
S
S
S
UPER
TORAGE
GLAN Enable/Disable
JPL1 enables or disables the GLAN
ports on the serverboard. See the
table on the right for jumper settings.
2
I
C Bus to PCI-Exp. Slots
Jumpers JI
C1 and JI
2
to connect the System Management
Bus (I
C) to the PCI-Express slots.
2
The default setting is closed (En-
abled.) Both jumpers must be set to
the same setting See the table on
the right for jumper settings.
BMC Enable
Jumper JPB1 allows you to enable
the embedded the Winbond WPC-
M450R BMC (Baseboard Manage-
ment) Controller to provide IPMI 2.0/
KVM support on the serverboard.
See the table on the right for jumper
settings.
YSTEM 6047R-E1CR36L User's Manual
C2 allow you
2
GLAN Enable
Jumper Settings
Jumper Setting Definition
Pins 1-2
Pins 2-3
I
C to PCI-E Slots
2
Jumper Settings
Jumper Setting
Closed
Open
BMC Enable
Jumper Settings
Jumper Setting
Pins 1-2
Pins 2-3
5-24
Enabled
Disabled
Definition
Enabled
Disabled
Definition
BMC Enable
Normal
Advertisement
Table of Contents
