Registration And Activation - Watchguard AP 200 Setup Manual

Requirements

The WatchGuard AP device must be managed by a WatchGuard XTM device that
uses Fireware XTM OS v11.7.2 or higher.

The WatchGuard AP device must be located on a Trusted or Optional network of the
WatchGuard XTM device to allow communication between the two devices.

Registration and Activation

You must register your WatchGuard AP to activate the device and start your LiveSecurity
subscription. The WatchGuard LiveSecurity subscription activates your hardware
replacement warranty, enables you to receive technical support, and provides access to the
latest OS updates and product news.

Automatic Activation — After you pair a WatchGuard AP device with an XTM
device, the XTM device automatically connects to the WatchGuard web site and
sends the information necessary to activate the AP device on the same WatchGuard
account where the XTM device was activated.

Manual Activation — You can activate the AP device in your WatchGuard account
just as you would activate an XTM device or add-on feature.

Go to http://www.watchguard.com/.

Log in with your WatchGuard account user name and password.

On the Support Home tab, click Activate a Product.

Type the serial number of the WatchGuard AP device (including hyphens).

Follow any remaining prompts to complete activation of your AP device.
2