Watchguard AP 200 Setup Manual page 8

T-rail Mounting Instructions
To mount your WatchGuard AP device on a suspended ceiling, you can use one of the two
T-rail connectors included in the mounting hardware kit: 15/16in (2.38cm) and 9/16in
(1.43cm). Before you mount your WatchGuard AP device, make sure you select the correct
T-rail connector size.
If you require additional space between the device and the ceiling, you can use the provided
spacers and long 6x25 screws.
To mount the device on a suspended ceiling with the T-rail connectors:
1. Attach the T-rail connectors to the bottom of the WatchGuard AP device with the
short 6x10 screws.
5