This guide introduces the XTM 2 Series, a series of RoHS-compliant (lead-free) hardware products offered by WatchGuard. The WatchGuard® XTM 2 Series is a network security device for small organizations and branch offices. The XTM 2 Series product line includes: ...
The Status indicator shows when there is a management connection to the device. The Status indicator is lit for 30 seconds after you connect to the device with the Fireware XTM Web UI or the command line interface. It is also lit when the device is polled by WatchGuard System Manager. Mode The Mode indicator shows the status of the external network connection.
USB interface Connect a USB storage device to use for USB backup and restore, or to store a support snapshot. For more information about USB functions, see current Fireware XTM WatchGuard System Manager Help or Fireware XTM Web UI Help.
Hardware Specifications AC Power Adapter The AC power adapter supplies power for the XTM 2 Series device. You must use the correct plug for the AC power adapter for the power source used in your country. The international plug kit includes four plugs: Q-NA (North America), Q-UK (United Kingdom), Q-EU (European Union), and Q-SAA (Asia).
10% – 95% Non-condensing Safety Notices All WatchGuard products are designed and tested to meet strict safety requirements. These requirements include product safety approvals and other global compliance standards. Read these instructions carefully before you operate the product, and refer to them as needed for continued safe operation of your product.
Page 9
Die in dem Gerät verwendete Lithium-Batterie kann nicht vom Verbraucher getauscht werden. Bei Bedarf senden Sie das Gerät an einen WatchGuard Autorisierten Service-Center, um diesen Tausch mit einer vom Hersteller empfohlenen gleichen oder eines gleichwertigen Typs durchführen zu lassen. Entsorgen Sie die Batterie, bzw.
This message also appears if the Reset button is stuck in the depressed position. If you continue to see this message, check the Reset button and start the device again. 5. Disconnect the power supply. 6. Connect the power supply again. The Power Indicator is lit and your device is reset. WatchGuard XTM 2 Series...
Page 11
Hardware Specifications About the XTM 2 Series Wireless The WatchGuard XTM 2 Series Wireless conforms to IEEE 802.11a/b/g/n wireless LAN standards. Some key features that have an effect on performance of an 802.11a/b/g/n wireless device include antenna directional gain, signal attenuation (path loss), and channel data rate.
WatchGuard Technologies, Inc. (“WatchGuard”) and you agree as set forth below or on the reverse side of this card, as applicable: 1.
Page 14
WITH REGARD TO ANY PRODUCT WILL IN NO EVENT EXCEED THE PURCHASE PRICE PAID BY YOU FOR SUCH PRODUCT. THIS SHALL BE TRUE EVEN IN THE EVENT OF THE FAILURE OF ANY AGREED REMEDY. IN NO EVENT WILL WATCHGUARD BE...
In particular, modifying antenna gain to exceed 2.0 dBi voids the FCC certification. CE Notice The CE symbol on your WatchGuard Technologies equipment indicates that it is in compliance with the Electromagnetic Compatibility (EMC) directive and the Low Voltage Directive (LVD) of the European Union (EU).
Legal and Regulatory Information CANADA RSS-210 The term “IC:” before the radio certification number only signifies that Industry of Canada technical specifications were met. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Legal and Regulatory Information Korean Class A Notice Korean Wireless Notice Taiwanese Class A Notice Taiwanese Wireless Notice WatchGuard XTM 2 Series...
WEEE statutes, and that the recovery of our product per the specific EU country legislative requirements is seamless for our product’s end users. If you have a WatchGuard product that is at its end of life and needs to be disposed of, please contact WatchGuard Customer Care Department at: U.S. Customers: 877.232.3531 International Customers: +1.206.613.0456...
Page 20
In accordance with the regulations, the products of WatchGuard do not need to be registered for the following reasons: 1. WatchGuard does not import more than 1 metric ton per year of a substance as defined by REACH. 2. WatchGuard products are non-chemical products that are not designed to release any substance under normal and reasonably predictable application.
Legal and Regulatory Information GNU General Public License (GPL) Each of the following programs are wholly or partially licensed under the GPL: ARPTables, bpalogin, bridge- utils, busybox, ebtables, glibc, hostapd, iproute, ipset, iptables, iputils, linux, nmap, ppp, pptpd, rp-pppoe, wireless_tools, wpa_supplicant. Specific copyright information for the above software, if any, can be found in subsequent pages of this chapter.
3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following: WatchGuard XTM 2 Series...
Page 23
Legal and Regulatory Information Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange;...
Page 24
INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. WatchGuard XTM 2 Series...
Need help?
Do you have a question about the XTM 25-W and is the answer not in the manual?
Questions and answers