Hardware Specifications - Watchguard AP 200 Setup Manual

Hardware Specifications

WatchGuard AP Specifications
MCU Processor Atheros AR9344 533MHz
Memory: Flash 16 MB
Memory: RAM 128 MB (64MB x 2)
Radio AP 100
(Radio 1) Atheros AR9344 for switchable 2.4Ghz/5GHz
AP 200
(Radio 1) Atheros AR9344 for 5GHz
(Radio 2) Atheros AR9382 for 2.4GHz
Gigabit Physical Atheros AR8035
Layer (PHY)
Radio Type and 2.4GHz, 802.11b/g/n, 5GHz, 802.11a/n
Frequency Band AP 100: 150 Mbps data rate
AP 200: 150 Mbps data rate per radio
Antenna Modular High Efficiency PIFA Antenna
Peak Gain:
2.4 to 2.5GHz / 3dBi
5.150-5.250GHz / 4dBi
Ethernet Interface 1 RJ45 connector for 10/100/1000 Gigabit Ethernet
Power Interface DC jack (12V DC input)
Power Supply 12V 1.25A
11