Installing The Phm - Supermicro SuperServer SYS-121C-TN10R User Manual

Installing the PHM

To install the PHM into the CPU socket, follow these steps.
1. Locate four threaded fasteners (a, b, c, d) and Pin 1 on the CPU socket.
d
2. Locate four PEEK nuts (A, B, C, D) and four rotating wires (1, 2, 3, 4) on the heatsink.
A, B, C, D: PEEK Nut
1, 2, 3, 4: Rotating Wire
a, b, c, d: Threaded Fastener
Rotating Wire
Rotating Wire
PEEK Nut
(Unlatched) (Latched)
Chapter 3: Maintenance and Component Installation
c
a
(a, b, c, d: Threaded Fasteners)
Rotating Wire
B
4
D
b
d
CPU Socket
39
b
CPU Socket Pin1
Heatsink
2
Rotating Wire
C
Rotating Wire
A
PEEK Nut
c
a
3
1