Table of Contents
Advertisement
Installation Overview
The processor (CPU) and processor carrier should be assembled together first to form
the processor carrier assembly. This will be attached to the heatsink to form the processor
heatsink module (PHM) before being installed onto the CPU socket.
Notes:
•
Use ESD protection.
•
The sytem power cords must be removed from all power supplies.
•
Check that the plastic protective cover is on the CPU socket and none of the socket pins
are bent. If they are, contact your retailer.
•
When handling the processor, avoid touching or placing direct pressure on the LGA lands
(gold contacts). Improper installation or socket misalignment can cause serious damage
to the processor or socket, which may require manufacturer repairs.
•
Refer to the Supermicro website for updates on processor support.
Installation Procedure Overview
After preparing the system, and following ESD precautions, there are four steps to installing
the processor and heatsink onto the motherboard.
1. Attach the processor to a plastic carrier to create the processor carrier assembly.
2. Attach the processor carrier assembly to the heatsink to create the processor heatsink
module (PHM).
3. Remove the socket cover.
4. Install the PHM.
Chapter 3: Maintenance and Component Installation
31
Advertisement
Table of Contents
Troubleshooting
