Table of Contents
Advertisement
CHANGING SCMH STRAP SIZE
The following table illustrates the unique
parts to a particular strap size for the SCMH
tool. If the strap size of the tool is to be
changed, this table must be used to
coordinate all the respective parts which
must be reconfigured or replaced.
Follow all specified parts removal,
replacement & adjustment procedures found
in this manual when changing any of the
strap conversion parts.
UNIQUE PARTS & CONFIGURATION TO SCMH STRAP SIZES
KEY
QTY
2
1
26
1
34
1
63
1
INNER GUIDE, REAR
NOTES:
1. On the front of the tool, install guide (Key 2) with text facing as
shown.
DESCRIPTION
Inner Guide
Outer Guide
Link
Nameplate
INNER GUIDE, FRONT
Do not attempt to convert a tool's strap
size without replacing/reconfiguring all
of the specified parts for the conversion.
Failure to replace/reconfigure all
required parts may cause severe
personal injury.
5/8" (16mm)
424529, Notes 1 & 3
424121, Note 5
424518, Note 5
424533
16
3/4" (19mm)
424529, Notes 2& 4
424121, Note-6
424518, Note 6
424535
OUTER GUIDE
Advertisement
Table of Contents
