Signode SCMH-58 Operation, Parts And Safety Manual page 15

#6 SYMPTOM: Tool cannot be removed from strap after cycle is completed.
CAUSE
1. Upper strap was not cut off.
2. Chipped or worn parts (punches and
dies).
#7 SYMPTOM: Feedwheel slips during tensioning.
CAUSE
Flat spot on feedwheel.
REMEDY
1. Inspect the cutter for damage or
adjustment. Cut strap manually from
package to release tension and de-
energize feedwheel.
2. Inspect and replace worn sealer parts.
REMEDY
Replace feedwheel.
15