Table of Contents
Advertisement
Using scene files (Scene File Data) (continued)
Saving scene files and other settings
on SD memory cards
You can save up to four scene file settings or other
settings as files on an SD memory card, and you
can also load them from the card.
• Current scene file settings are automatically
saved in the camera-recorder and written to an
SD memory card. When data has been read
from an SD memory card, the current settings
are rewritten at the same time as the data saved
inside the unit.
• The data in all the scene files, F1 to F6, is
rewritten.
• Be sure to read <Cautions in using SD memory
cards> (Page 159) regarding SD memory handling.
The following procedure shows how to save scene
files.
1
Set the POWER/MODE switch to ON.
2
Select SCENE FILE from the setting menu
CARD FUNCTIONS screen, and press SET
on the Operation lever (or push it in the ►
direction).
• For details on menu operation, refer to "Basic
operations of setup menus" (Page E-27 of Vol.
1).
CARD FUNCTIONS
SCENE FILE
USER FILE
SD CARD FORMAT
PUSH MENU TO RETURN
3
Select CHANGE, and press SET on the
Operation lever, (or push it in the ►
direction).
• Select the menu option USER FILE for other
settings.
CARD FUNCTIONS
SCENE FILE
USER FILE
SD CARD FORMAT
PUSH MENU TO RETURN
58
>>>
>>>
>>>
RETURN
CHANGE
>>>
4
Push the Operation lever in the ▲ ▼
direction, and select file number (1 to 4).
• Press the SET button again to confirm the
setting.
SCENE FILE (SD CARD)
FILE SELECT
READ
WRITE
FILE1
FILE2
FILE3
FILE4
TITLE RELOAD
PUSH MENU TO RETURN
5
Select WRITE → EXECUTE with the
Operation lever, and press SET.
SCENE FILE (SD CARD)
FILE SELECT
READ
WRITE
FILE1
FILE2
FILE3
FILE4
TITLE RELOAD
PUSH MENU TO RETURN
6
Push the Operation lever in the ◄ direction
and select YES when the screen below is
displayed, and press SET.
• In the following example, TITLE 1 is the
filename.
• When writing is completed, WRITE OK
appears.
SCENE FILE (SD CARD)
WRITE FILE 1
YES
NO
TITLE EDIT
TITLE 1
PUSH MENU TO RETURN
To load a file
Perform steps 1 to 4. Select READ in step 5, select
EXECUTE and press the SET button on the
Operation lever. READ OK appears when loading
completes.
Like scene files, process user files by using the
menu option USER FILE in the CARD FUNCTION
screen.
Reloading Files From an SD Memory Card
Perform steps 1 through 3, select TITLE RELOAD
in step 5 followed by EXECUTE, and then press
the SET button on the Operation lever. The file is
reloaded.
1
>>>
>>>
NO FILE
NO FILE
NO FILE
NO FILE
>>>
1
>>>
RETURN
EXECUTE
NO FILE
NO FILE
NO FILE
>>>
PUSH SET ( )
Advertisement
Table of Contents
