Panasonic P2HD AG-HPX250EJ Operating Instructions Manual page 153

Memory card camera-recorder
Hide thumbs Also See for P2HD AG-HPX250EJ:
Table of Contents

Advertisement

Shooting
Cannot shoot even
though the P2 card is
inserted correctly.
Cannot perform interval
recording, one-shot
recording or loop
recording.
Editing
Cannot perform
nonlinear editing.
Cannot dub onto an
external device.
Displays
Something is wrong with
the time code display.
• Make sure the P2 card's write-protect switch is not in the
PROTECT position.
Recording is not possible if it is in this position.
• There may be little free memory left on the P2 card.
If so, save the data onto another media, and delete the data
you no longer need; alternatively, replace the card with a
new one.
• The P2 card may be formatted incorrectly. Alternatively, the
card you are using may not be formatted for use with the
unit. If so, format the card in the unit.
• 2 GB P2 cards cannot be used.
• The media information display may be indicating "
If so, format the card in the unit.
• Recording is not possible if the number of clips on a single
P2 card exceeds 1000.
As clips made of many linked clips are generated with one-
clip recording, there may be 1000 clips even when the
number of clips you can see on the thumbnail screen is less
than 1000.
• Insert 2 cards which recording space are left over 1 minutes
when performing loop recording.
• In modes such as 24P you cannot perform these types of
recording.
See page 43 "Using special recording modes" and set the
recording format etc.
• Check the specifications of your personal computer and
connecting cable.
• Check the menu settings and operation mode.
For a 1394 connection, use PB/THUMBNAIL mode.
Also, for a USB connection, set PC MODE SELECT to USB
DEVICE and select PC mode using the POWER/MODE
switch.
• Make sure the external device is connected correctly.
• Are you using a mode that can output from the DVCPRO/DV
terminal?
You cannot output with native recording mode for AVC-Intra,
24PN etc.
• The time code display may not register a regular count if a
tape is played in the reverse slow mode. This is normal.
(Page 12)
(Page 13)
".
(Page 121)
E
(Page 46)
(Page 102)
(Page 107)
(Page 134)
(Page 103)
153

Advertisement

Table of Contents
loading

Table of Contents