Table of Contents
Advertisement
Setup menu list (continued)
SCENE FILE screen (continued)
Item
CHROMA LEVEL Adjusts the chroma level.
CHROMA PHASE Makes fine adjustments to the chroma phase.
COLOR TEMP
Ach
COLOR TEMP
Bch
MASTER PED
A. IRIS LEVEL
DRS
DRS EFFECT
GAMMA
*1: The factory default when the SCENE FILE dial is set to F1.
___indicates the factory setting.
130
– 7 ...0
... +7
*1
– 7 ...0
... +7
*1
Makes fine adjustments to the color temperature (after
Ach white balance adjustment).
– 7 ...0
... +7
*1
Makes fine adjustments to the color temperature (after
Bch white balance adjustment).
– 7 ...0
... +7
*1
Adjusts the black master pedestal that serves as the video
reference.
– 100 ...+15
... +100
*1
Sets the AUTO IRIS target value.
– 10 ...0
... +10
*1
Sets whether to operate the DRS (dynamic range
stretcher) function.
ON, OFF
*1
Sets the compression level in high-brightness areas of the
DRS (dynamic range stretcher) function.
This function compresses the video signal level to extend
the dynamic range making it possible to correctly render
highlight areas without overexposure and loss of detail
that would otherwise occur.
1, 2, 3
*1
• Higher numbers mean a higher compression level of
high-brightness areas and more noise in dark areas.
Selects the gamma curve.
HD NORM :
*1
Gamma setting for HD recording.
LOW:
Applies a gently rising gamma curve to low brightness
areas for a balanced look.
SD NORM:
Normal video setting inherited from the DVX100 series.
HIGH:
Applies a steep gamma curve to low brightness areas to
expand the tonality of dark areas for video with greater
brightness. Contrast softens as a result.
B.PRESS:
Produces sharper contrast than LOW.
CINELIKE D:
Applies a gamma curve to produce video with a cine-like
feel.
CINELIKE V:
Applies a gamma curve to produce high-contrast video
with a cine-like feel.
• A lens aperture set lower than normal video level
(approx. 1/2) is recommended when using cine-like
gamma to enjoy the full benefit of the function.
Setting
Notes
• Values change quickly when
the Operation lever is held in
the ▲ ▼ direction.
• When using 1080i, the DRS
function is not available if
shooting with 24P, 30P, 25P, or
VFR (variable frame rate) even
if you select ON.
• A change in settings during
DRS operation will not change
video quality.
Advertisement
Table of Contents
