Nameplate - Sunrise Medical Zippie TS Manual

Z IPPI E T S
Z IPPI E T S

NAMEPLATE

The nameplate is located on the crosshead tubes, as well as on a label in
the operator's manual. The plate indicates the exact name of the model and
provides various technical information. For a spare parts order or complaint,
please provide the following information:
• Serial number
• Order number
• Month/Year
SAMPLE
Sunrise Medical (US) LLC
2842 Business Park Ave,
Fresno, CA 93727
Type: Zippie TS Rigid
Sunrise Medical GmbH
Manual
EC REP Kahlbachring 2-4
Wheelchair
69254 Malsch-HD / Germany
75 kg max 6° 460 mm 510 mm
Sunrise Medical Limited
Thorns Road, Brierley Hill
West Midlands, DY5 2LD
UNITED KINGDOM
We at SUNRISE MEDICAL have been awarded the ISO-13485 certifi cate,
which affi rms the quality of our products at every stage, from R & D to
production. This product complies with the standards set forth in EU and UK
regulations. Options or accessories shown are available at extra cost.
The management system of SUNRISE MEDICAL is certifi ed to EN ISO
13485 and ISO 14001.
We at SUNRISE MEDICAL have been awarded the ISO-13485 certifi cate,
which affi rms the quality of our products at every stage, from R & D to pro-
duction. This product meets the requirements in accordance with EU and UK
regulations. Options or accessories shown are available at extra cost.
NOTE: General user advice. Not following these instructions may result in
physical injury, damage to the product or damage to the environment!
Notice to the user and/or patient: any serious incident that has occurred
in relation to the device should be reported to the manufacturer and the
competent authority of the Member State in which the user and/or patient is
established.
YYYY-MM-DD
Z1A-#####
SN
MD
30
TYPE: Product Name/SKU Number
Maximum safe slope with anti-tip tubes fitted,
Depends on wheelchair setting, posture and
max X°
physical capabilities of the user.
Seat width
XXX mm
Seat depth
XXX mm
kg
Max user weight
XXX kg
Maximum slope
max X°
UKCA Mark
CE Mark
Consult instructions for use
Date of manufacture
XXXX-XX-XX
Serial number
This symbol means Medical Device
Manufacturer's address
Crash tested according to
ISO 7176-19:2008
ISO 7176-19:2008
Importer's address
European Authorized Representative
UK Responsible Person
Swiss Representative's address
As the manufacturer, SUNRISE MEDICAL, declares that this prod-
uct conforms to the Medical Device Regulation (2017/745).
As the manufacturer, SUNRISE MEDICAL, declares that the prod-
uct conforms to the UK Medical Devices Regulation 2002 No. 618.
B4Me special adaptations
Sunrise Medical strongly recommends that in order to ensure that your B4Me
product operates, and performs as intended by the manufacturer; all the user
information supplied with your B4Me product is read and understood, before
the product is fi rst used. Sunrise Medical also recommends that the user
information is not discarded after reading it, but it is kept safely stored for
future reference.
Medical Device Combinations
It may be possible to combine this Medical device with one or more other
Medical Device or other product. Information on which combinations are
possible can be found at www.Sunrisemedical.co.uk. All combinations listed
have been validated to meet the General Safety and Performance Require-
ments, section 14.1 of the Medical Device Regulation 2017/745.
Guidance on the combination, such as mounting, can be found at www.
SunriseMedical.co.uk.
H EAD ER
X. NAMEPLATE
MK-100208 RevB