Folding And Unfolding; Integrated Stroller Handles; Backrest - Sunrise Medical Zippie TS Manual

Hide thumbs Also See for Zippie TS:

Table of Contents

Z IPPI E T S

O. FOLDING AND UNFOLDING

Possible pinch point! BE CAREFUL.

NOTE– Only chairs with cross brace assembly will fold.

To fold the chair, remove the seat and back.

Pull the cross brace strap (A) up.

Press the side frames together firmly.

To open the chair, extend fingers and apply even pressure with palm of hand directly on cross brace

until it is fully extended.

Replace the seat and back.

To avoid pinching, be careful when folding or unfolding a chair.

NOTE – Ensure that footrests are flipped down and locked prior to use.

P. INTEGRATED STROLLER HANDLES

Positioning Swing-Away Adjustable Stroller Handles

Loosen push handle (B) by pushing the black button (C). You can then raise or lower stroller handle to

desired position.

NOTE - For easy storage and portability, push handles will swing in and stroller handles fold flat.

Q. BACKREST

Note– Zippie series wheelchairs are shipped with the backrest in a folded position.

1. Folding the backrest

a. For easier storage and transport, locate the backrest release pin lever (D) on both sides and pull up

on the levers while pushing the backrest forward.

2. Unfolding the backrest

a. To secure the backrest in a riding position, lift by the handles to an upright position. When secured,

the backrest release pin will lock into place.

NOTE - For easy storage and portability, push handles should fold flat and not interfere with folding.

NOTE– Zippie series wheelchairs are shipped with the backrest in a folded position.

MK-100208 RevB

WARNING

(option)

VIII. USE AND MAINTENANCE

Table of Contents