Table of Contents
Advertisement
Available languages
Available languages
11.3 Detaching the appliance door
If it is particularly dirty, you can remove the appliance
door to clean it more thoroughly.
Open the appliance door fully.
1.
Use the security pins to lock the left- and right-hand
2.
hinges.
The locking pins must be fully inserted into the
holes in the hinges.
Grip the appliance door on either side with both
3.
hands and close it by approx. 30 degrees.
Do not close the appliance door fully. The hinges
could become bent and the enamel could be dam-
aged.
Lift the appliance slightly and pull it out completely.
4.
11.4 Attaching the appliance door
WARNING ‒ Risk of injury!
If the hinges are not secured due to an incomplete
lock, they can snap shut with great force.
If the hinge snaps shut when detaching or attaching
▶
the appliance door, do not reach into the hinge.
Call customer service.
▶
Troubleshooting
12 Troubleshooting
You can rectify minor faults on your appliance yourself.
T
r
o
u
b
o
l
e
n
i
h
t
o
s
-
g
Read the troubleshooting information before contacting
after-sales service. This will avoid unnecessary costs.
WARNING ‒ Risk of injury!
Improper repairs are dangerous.
Repairs to the appliance should only be carried out
▶
by trained specialist staff.
If the appliance is defective, call Customer Service.
▶
→ "Customer Service", Page 32
12.1 Malfunctions
Fault
The appliance is not
working.
Cause and troubleshooting
The mains plug of the power cord is not plugged in.
Connect the appliance to the power supply.
▶
There has been a power cut.
Check whether the lighting in your room or other appliances are working.
▶
The circuit breaker in the fuse box has tripped.
Check the circuit breaker in the fuse box.
▶
If a door pane or appliance door has not been installed
correctly, this is dangerous.
Make sure that all of the door panes and the appli-
▶
ance door have been correctly fitted before you
switch the appliance back on again.
Grip the appliance door on either side with both
1.
hands.
Slide the hinges into the slots in the appliance.
2.
The notch below the hinges must engage into the
frame of the appliance.
Lower the appliance door downwards.
3.
Remove the locking pins.
4.
Note: Do not throw away the locking pins. Store the
locking pins in a secure location. You always require
the locking pins when you remove the door or door
panels from the appliance. If you do not have any lock-
ing pins, you can order these from customer service.
WARNING ‒ Risk of electric shock!
Improper repairs are dangerous.
Repairs to the appliance should only be carried out
▶
by trained specialist staff.
Only use genuine spare parts when repairing the
▶
appliance.
If the power cord of this appliance is damaged, it
▶
must be replaced by the manufacturer, the manufac-
turer's Customer Service or a similarly qualified per-
son in order to prevent any risk.
Troubleshooting en
31
Advertisement
Table of Contents
