Table of Contents
Advertisement
Available languages
Available languages
en Appliance door
To thoroughly clean the rails and the cooking compart-
ment, or to replace the rails, you can remove the rails.
10.1 Detaching the rails
The rails are each fixed to the side panels of the cook-
ing compartment at 3 points.
Grip the front of the rail and pull it round to the
1.
middle of the cooking compartment.
a The front hook of the rail comes out of the hole.
Appliance door
11 Appliance door
With good care and cleaning, your appliance retains its
r
o
o
d
e
c
A
a
-
i
l
-
p
p
n
appearance and remains fully functioning for a long
time to come. This will tell you how to clean the appli-
ance door.
Note: To ensure that the appliance door does not
come into contact with the fitted unit, the appliance
door opens slightly less than 90°.
11.1 Removing the door panels
To facilitate cleaning, you can remove the glass panels
from the appliance door.
WARNING ‒ Risk of injury!
Scratched glass in the appliance door may develop
into a crack.
Do not use any harsh or abrasive cleaners or sharp
▶
metal scrapers to clean the glass on the oven door,
as they may scratch the surface.
Open the appliance door fully.
1.
Use the security pins to lock the left- and right-hand
2.
hinges.
The locking pins must be fully inserted into the
holes in the hinges.
30
Swing the rail round further and pull it out of the rear
2.
holes in the side panel.
Remove the rail from the cooking compartment.
3.
10.2 Attaching the rails
Insert the hooks of the rail into the rear holes in the
1.
side panel.
Push the front hook of the rail into the hole.
2.
Use both hands to lift the lower section of the inner
3.
panel until the fastening pins come out of the
holder.
Carefully lift the top section of the inner panel until
4.
the fastening pins come out of the holder.
Lift out the inner panel and set it down carefully on a
5.
flat surface.
Clean the door panels with glass cleaner and a soft
6.
cloth.
11.2 Fitting the door panels
Insert the inner panel.
1.
All four fastening pins must engage in the holders
provided for them.
Remove the locking pins and close the appliance
2.
door.
Note: Do not throw away the locking pins. Store the
locking pins in a secure location. You always require
the locking pins when you remove the door or door
panels from the appliance. If you do not have any lock-
ing pins, you can order these from customer service.
Advertisement
Table of Contents
