Manitou E-E3 Series Operator's Manual page 95

15 - SINGLE SIDE-SHIFT CARRIAGE (TSDL)
MT 1030 S Turbo Série 5-E3
The single side-shift carriage (TSDL) is only compatible with the following attachments:
• floating fork carriage (TFF)
• tilting fork carriage (PFB)
• loading bucket (CBR)
• concrete bucket (BB, BBG)
• spout bucket (GL)
• crane boom and crane boom with winch (P, PT, PO, PC)
• winch (H)
It is prohibited to use any other attachments on the TSDL.
If it is being used with a loading bucket (CBR), the single side-shift carriage MUST be centred and no side-shift operations
performed.
WITH COUPLER ON BOOM HEAD
SINGLE SIDE-SHIFT CARRIAGE
- Put the valve in position A.
- Lift and move lever 1 to the left or right.
ATTACHMENT
- Put the valve in position B.
- Lift and move lever 1 to the left or right.
WITH BOOM HEAD ELECTROVALVE
SINGLE SIDE-SHIFT CARRIAGE
- Lift and move lever 1 to the left or right.
ATTACHMENT
- Hold down button 2, lift and move lever 1 to the left or
right.
WITH BOOM HEAD ELECTROVALVE +PREARRANGED
HYDRAULIC ATTACHMENT LOCKING
SINGLE SIDE-SHIFT CARRIAGE
- Lift and move lever 1 to the left or right.
ATTACHMENT
- Put the valve in position A.
- Hold down button 2, lift and move lever 1 to the left or
right.
PREARRANGED HYDRAULIC ATTACHMENT LOCKING
- Put the valve in position B.
- Hold down button 2, lift and move lever 2 to the right
to lock the attachment or to the right to unlock the
attachment.
Once the attachment is locked, return valve to position B to prevent accidental release of the attachment.
A
B
B
A
2-63
TSDL
1
2
1
2
1