Manitou E-E3 Series Operator's Manual page 88

4 - MODCOD ANTI-THEFT SYSTEM
OPERATION
- Switch on the lift truck: the red indicator 1 will flash.
- Enter your user code followed by "V" to validate: the green indicator 2 will come on.
- Start the lift truck within the next 60 seconds; otherwise the anti-theft system will be reactivated
and the red indicator 1 will flash.
NOTE: If you make a mistake when entering the code, press key "A" to cancel and
re-enter the code in full.
If you wait more than 5 seconds between key presses or do not complete entering the
code, the anti-theft system will be reactivated and the red indicator will flash.
5 - FINTRONIC ANTI-START SYSTEM
OPERATION
- Switch on the lift truck and set the black key A next to the antenna B (maximum 80 mm).
- Wait a few seconds for red led C to go out before starting the lift truck.
NOTE: You can restart the lift truck within 20 seconds of stopping it: after this time, the anti-start
system reacts and led C flashes red.
6 - MODCLÉ ANTI-START SYSTEM
OPERATION
- Switch on lift truck ignition, red led 1 will flash.
- Apply key 2 to its base 3, and withdraw the moment the system emits a continuous beep, and
led 1 turns green.
- Start the lift truck within the next 20 seconds; otherwise the anti-theft system will be reactivated
and red led 1 will flash.
NOTE: You can restart the lift truck within 20 seconds of stopping it; after this time, the anti-start
system reacts and red led 1 flashes.
7 - QUICK-RELEASE COUPLER ON ATTACHMENT CIRCUIT
Enables the use of a hydraulic attachment.
2-56
2 1
C
B
A
1
2
3