Manitou E-E3 Series Operator's Manual page 147

INTRODUCTION
- Your lift truck must be used with interchangeable equipment. These items are called: ATTACHMENTS.
- A wide range of attachments, specially designed and perfectly suitable for your lift truck is available and guaranteed by MANITOU.
- The attachments are delivered with a load chart concerning your lift truck. The operator's manual and the load chart should be kept in the
places provided in the lift truck. For standard attachments, their use is governed by the instructions contained on this notice.
We would remind users that the MT 932 Série E-E3, MT 1030 S Turbo Série 5-E3, are lift trucks essentially intended for handling. Occasional use with the buckets
CBC 800/900 and CBR 900/1000 is authorised, but under no circumstances is intensive use for difficult applications (quarry, waste, cereals, agriculture, etc)
permissible.
In addition, use of the lift truck with the buckets CBC 800/900 and CBR 900/1000 should be with the jib completely retracted, in order to reduce the constraints
on the jib head.
Use other buckets CBA, CBC, CBM, CBR, CB, CBG and manure forks FFGR is forbidden.
- Some particular uses require the adaptation of the attachment which is not provided in the price-listed options. Optional solutions exist,
consult your dealer.
Suspended loads MUST be handled with a lift truck designed for that purpose (see: 1 - OPERATING AND SAFETY INSTRUCTIONS: LOAD HANDLING INSTRUCTIONS:
H - TAKING-UP AND SETTING-DOWN A SUSPENDED LOAD).
OnlyattachmentsapprovedbyMANITOUaretobeusedonourlifttrucks(see:4-ADAPTABLEATTACHMENTSINOPTIONONTHERANGE:TECHNICALSPECIFICATIONS
OF ATTACHMENTS). The manufacturer's liability will be denied in case of modification or of attachment adaptation carried out without his knowing it.
The single side-shift carriage (TSDL) is only compatible with the following attachments:
• floating fork carriage (TFF)
• tilting fork carriage (PFB)
• loading bucket (CBR)
• concrete bucket (BB, BBG)
• spout bucket (GL)
• crane jib and crane jib with winch (P, PT, PO, PC)
• winch (H)
• fixed platform, swivelling platform, roofer's platform.
It is prohibited to use any other attachments on the TSDL.
Attachments authorised for use on the TSDL must comply strictly with the applications for which they are designed.
It is prohibited to use them for any other application (for example, earth moving, excavation, desurfacing, back scraping, etc. for the loading bucket CBR) or any
application placing abnormal stress on the structure of the TSDL: risk of deformation which could cause the load to fall.
Depending on their size, certain attachments may, when the jib is lowered and retracted, come into contact with the front tyres and cause damage to them, if
reverse tilt is activated in the forward tilt direction. TO REMOVE THIS RISK, EXTEND THE TELESCOPE TO A SUFFICIENT EXTENT FOR THE PARTICULAR LIFT TRUCK
AND ATTACHMENT SO THAT THIS CONTACT IS NOT POSSIBLE.
Maximum loads are defined by the capacity of a lift truck taking account of the attachment's mass and centre of gravity. In the event of the attachment having
less capacity than the lift truck, never exceed this limit.
4-5