Clevo W355SSQ Service Manual page 34

Disassembly
Removing the Hard Disk(s) in the Secondary HDD Bay
Figure 6
1. Turn off the computer, and turn it over and remove the battery.
Secondary HDD
2. Locate the component bay cover and remove screws
Assembly Removal
3. The hard disk will be visible at point
4. Remove screws
a. Remove the screws and
5. Grip the tab and slide the hard disk in the direction of arrow
cover.
6. Lift the hard disk assembly
b. Locate the hard disk.
c. Remove the screws.
7. Remove the screws
d. Slide the hard disk as-
8. Reverse the process to install any new hard disk.
sembly out.
a.
e. Lift the hard disk assem-
bly out off the computer.
1
f. Remove the screws and
separate the HDD(s)
from case.
c.

5
12. Hard Disk
13. Hard Disk Mylar
14. Hard Disk Case
• 7 Screws
Note:
Re-insert the cable
hard disk assembly and tightening the screws.
2 - 10 Removing the Hard Disk Drive
-
(Note that you need to set aside the cable
6 7
out of the compartment.
9
-
to release the hard disk(s)
10 11
2
3
d.
6
7
after reinstalling the
5
- and the cover.
1 3
on the mainboard.
4
5
(Figure 6e
8
and hard disk mylar
12
b.
4
e.
8
9
to see the screw ).
6
).
from the case
13 14
f.
13
c.
12
14
11
.
10