Clevo W355SSQ Service Manual page 31

Removing the Hard Disk Drive
The hard disk drive is mounted in a removable case and can be taken out to accommodate other 2.5" SATA hard disk
drives with a height of 9.5mm or 7mm (h). Follow your operating system's installation instructions, and install all nec-
essary drivers and utilities (as outlined in Chapter 4 of the User's Manual) when setting up a new hard disk.
Hard Disk Upgrade Process
1. Turn off the computer, and turn it over and remove the battery
2. Locate the Hard disk bay cover and remove screw
3. Slide the cover in the direction of the arrow
4. Remove the bay cover .
4
a.
1
(page 2 - 5).
.
1
(as illustrated) until the case markers
2
b.
3 3
2
a. Remove the screw.
b. Remove the cover
line up.
3
4
Removing the Hard Disk Drive 2 - 7
Disassembly
Figure 3
HDD Assembly
Removal

4. Hard Disk Bay Cov-
er
• 1 Screw