MN010089A01-AB
Chapter 3 : Hardware Installation
Chapter 3
Hardware Installation
The Mobile Companion application is used to guide the installation technician at the installation site.
The installation process is different depending on which power solution has been selected.
Mobile Companion Application Navigation During Installation
Use the following navigation features as needed while performing the installation:
•
To start the installation process, tap a camera with Ready to be installed. in the Cameras list.
•
To resume a paused installation, tap a camera with Installation Paused. in the Cameras list. Then,
tap the Continue installing camera action or Continue installation now... text.
•
To advance to the next installation screen, tap the Next or Continue buttons.
•
To return to the previous installation screen, tap the
•
To pause the installation process and exit to the Cameras screen, tap the the
•
To open a list of installation screens, tap the
the process.
•
To perform camera aiming without viewing the installation screens, tap Skip to Aiming when
prompted. When choosing this option, go to
3.1
Starting the Installation Process in Mobile Companion
Follow along with the installation process in the mobile application.
Prerequisites: To begin hardware installation, the following must be true:
•
The Pre-installation has been performed and completed
•
The installer is at the installation site
•
An Agency Manager or Site Manager account is logged in to the Mobile Companion application
Obtain:
•
L6Q Installation Kit
•
Required Items and Tools for this installation
•
Optional Add-ons for this installation
Procedure:
1 Start the installation process for the camera being installed in the Mobile Companion application.
It may be necessary to perform the camera pairing process again at the installation site. See
Pairing Cameras to Mobile Companion on page 40
Cameras list.
a Open the mobile application.
44
Back Arrow icon.
Menu icon. Tap a screen to go to that part of
Camera
Aiming.
if the camera being installed is not in the
Exit icon.