Motorola L6Q Installation Manual page 41

Option
Scanning the QR Code.
Entering the Serial Number.
9 Wait for the pairing process to complete.
When pairing is complete, the Hardware Installation screen appears.
10 Select one of the following options:
If...
If the installer is at
the installation site
and ready to perform
Actions
a Tap the
b In a well lit area, aim the mobile phone
c Adjust the camera until a scan is made
Figure 9: QR Code Location
a Tap the
b Locate the camera serial number inside
c Enter the <serial number> into the
d Tap the Pair Camera button.
Then...
perform the following actions:
a Disconnect any external power source from the camera.
Chapter 2 : Pre-Installation
Scan QR Code icon.
camera at the QR code inside of the
Charging Port Door.
and a chime sound is heard.
Enter Serial Number
icon
the battery compartment.
Serial Number field.
NOTE: To obtain the camera se-
rial number without removing the
Battery Tray, try scanning the QR
code with a mobile phone camera
application. Most camera applica-
tions will display the serial number
encoded in the QR code.
MN010089A01-AB
41