Focal Point EVOKE F500176 Installation & User's Instructions

Focal Point EVOKE F500176 Installation & User's Instructions

Wall mounted electric fire

Advertisement

Quick Links

INSTALLATION & USER INSTRUCTIONS
Focal Point Fires plc.
Christchurch, Dorset BH23 2BT
Tel: 01202 499330
Fax: 01202 499326
www.focalpointfires.co.uk
e : sales@focalpointfires.co.uk
Please note : Except where otherwise stated, all rights,
including copyright in the text, images and layout of this
booklet is owned by Focal Point Fires plc. You are not per-
mitted to copy or adapt any of the content without the
prior written permission of Focal Point Fires plc.
WALL MOUNTED ELECTRIC FIRE
MODELS COVERED BY THESE INSTRUCTIONS
EVOKE LCD ELECTRIC-
In the event of a problem with
this product, please call our
Customer Care Helpline.
01202 499 330
All instructions must be handed to the user for
1
GB IE
F500176
safekeeping.
Revision D- 07/10
©
2010 Focal Point Fires plc.
EVOKE

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EVOKE F500176 and is the answer not in the manual?

Questions and answers

Summary of Contents for Focal Point EVOKE F500176

  • Page 1 01202 499 330 including copyright in the text, images and layout of this booklet is owned by Focal Point Fires plc. You are not per- All instructions must be handed to the user for mitted to copy or adapt any of the content without the safekeeping.
  • Page 2: Preliminary Notes

    If you are unsure of the ability of the wall to carry the weight and/or which type of wall fixing to use, you should take pro- fessional advice and obtain the correct fixings. Alternatively, find a more suitable wall location. © © 2010 Focal Point Fires plc. 2010 Focal Point Fires plc.
  • Page 3: Clearances To Combustible Materials

    Focal Point Fires plc. assumes absolutely no responsibility for injuries and damages that may occur due to improper installation or handling. The appliance should not be installed until all wet plastering and/or dry wall sanding and wall painting has been completed.
  • Page 4: Operating The Appliance

    ) switch to start the blower. To obtain heat from the appliance, the blower must be on and the I switch must then be operated for LOW heat, followed by the II switch for the HIGH heat setting. © 2010 Focal Point Fires plc.
  • Page 5 A yellow menu low bar over the menu bar will now shown on items. In this example the the ‘Return’ option (fig- contrast menu has been ure 15). selected (figure 16). Fig. 15 Fig. 16 © 2010 Focal Point Fires plc.
  • Page 6 CARE SHOULD BE TAKEN NOT TO DAMAGE THE FAN BLADES. DO NOT TOUCH THE FAN BLADES EXCEPT WITH THE BRUSH. Re-assemble the appliance and fit back on the wall. IMPORTANT : DO NOT OPERATE THE HEATER WITHOUT THE FAN COVER FITTED. Figure 21 © 2010 Focal Point Fires plc.
  • Page 7 Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your local authority or retailer for recycling advice. As our policy is one of continuous improvement and development, we therefore hope that you will understand we must retain the right to amend details and/or specifica- tions without prior notice. © 2010 Focal Point Fires plc.

Table of Contents