Cable Diagram
1 2 3 4 5 6 7 8
NOTE:
•
Pins 1 and 2 on connector "A" must be wired as a twisted pair to pins 3 and 6 on connector "B".
•
Pins 3 and 6 on connector "A" must be wired as a twisted pair to pins 1 and 2 on connector "B".
•
Pins 4, 5, 7, and 8 are not used in this application, although they may be wired in the cable.
Pin Assignments
Switch End (MDI-X)
Signal
receive +
receive -
transmit +
transmit -
Straight-Through Twisted-Pair Cable for 1000 Mbps Network Connections
1000BASE-T connections require that all four pairs of wires be connected.
Connector A
Crossover cable
white/orange
orange/white
Pins
Connector B
1 2 3 4 5 6 7 8
white/green
green/white
Hub or Switch Port, or Other MDI-X Port End
Pins
Signal
transmit -
transmit +
receive -
receive +
Cable Diagram
43