Standards; Cabling And Technology Information Specifications - HPE OfficeConnect 1920S Series Installation And Getting Started Manual

• EN60950-1:2006+A11:2009+A1:2010+A12:2011 / IEC60950-1:2005; Am1:2009;
• CSA22.2 No. 60950-1-07 2nd; UL60950-1 2nd
• EN 60825-1:2007 / IEC 60825-1:2007 Class 1

Standards

Technology
10-T
100-TX
1000-T
100-FX
1000-SX
1000-LX

Cabling and Technology Information Specifications

Twisted-pair copper 10 Mbps Operation
Multimode fiber
Single mode fiber
1
A mode conditioning patch cord may be needed for some Gigabit-LX installations.
See Mode Conditioning Patch Cord on page 39 for more information.
38 Standards
Compatible with these
IEEE standards
IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3ab 1000BASE-T
IEEE 802.3u 100BASE-FX
IEEE 802.3z 1000BASE-SX EN/IEC 60825
IEEE 802.3z 1000BASE-LX EN/IEC 60825
100 Mbps Operation Category 5, 100-ohm UTP or STP cable, complying with
1000 Mbps
Operation
Laser safety information
EN/IEC standard
compliance
EN/IEC 60825
Category 3, 4 or 5, 100-ohm unshielded twisted-pair
(UTP) or shielded twisted-pair (STP) cable, complying with
IEEE 802.3 10BASE-T specifications.
IEEE 802.3u 100BASE-TX specifications.
Category 5, 100-ohm 4-pair UTP or STP cable, complying
with IEEE 802.3ab 1000BASE-T specifications—Category
5e or better is recommended. See note on 1000BASE-T
Cable Requirements below.
62.5/125 μm or 50/125 μm (core/cladding) diameter, low
metal content, graded index fiber-optic cables, complying
with theITU-T G.651 and ISO/IEC 793-2 Type A1b or A1a
1
standards respectively.
9/125 μm (core/cladding) diameter, low metal content
fiber-optic cables, complying with the ITU-T G.652 and
ISO/IEC 793-2 Type B1 standards.
SFP Lasers
Class 1 Laser Product
Laser Klasse 1
Class 1 Laser Product
Laser Klasse 1
Class 1 Laser Product
Laser Klasse 1