Connecting - 10Pin Pnp Cable - r.LiNK 27-590 Manual

Compatible with vauxhall vehicles with navi 900 intellilink navigation system with 8” touch monitor

Table of Contents

2.3.

Connection - 10pin PNP cable

Connect the female 6pin connector of the 6 to 12pin cable to the 6pin connector of the

video interface.

Connect the female 8pin connector of the communication cable to the 8pin connector of the

video interface.

Remove the female 10pin connector of the factory harness at the rear-side of the monitor

and connect it to the male 10pin connector of the 10pin PNP cable.

Connect the opposite female 10pin connector of the 10pin PNP cable to the previously

become free male 10pin connector at the rear-side of the monitor.

Table of Contents